Welcome: Sinotrust International Trade Co. Ltd
Language: Chinese ∷  English

Adhesives & Sealants

  • dcoit 20 biocide for Adhesives and Tackifiers
  • dcoit 20 biocide for Adhesives and Tackifiers
  • dcoit 20 biocide for Adhesives and Tackifiers
  • dcoit 20 biocide for Adhesives and Tackifiers
  • dcoit 20 biocide for Adhesives and Tackifiers
dcoit 20 biocide for Adhesives and Tackifiersdcoit 20 biocide for Adhesives and Tackifiersdcoit 20 biocide for Adhesives and Tackifiersdcoit 20 biocide for Adhesives and Tackifiersdcoit 20 biocide for Adhesives and Tackifiers

dcoit 20 biocide for Adhesives and Tackifiers

  • CAS NO.: 64359-81-5
  • Purity:20%
  • Appearance greenish-yellow, clear liquid
  • Package: 20kg, 180kg drum
  • Product description: DCOIT-20 microbicide is a flowable dispersion that is easily incorporated into paint formulations. In principle, it can be added to the paint at any point in the paint preparation process.
  • INQUIRY

dcoit 20% biocide  CAS 64359-81-5

Industrial Microbicide for Use in Coatings, Building Materials, Adhesives and Tackifiers


Product Name
DCOIT 20; Dichloroctylisothiazolinone; 4,5-Dichloro-2-octyl-isothiazolone;
Synonyms
4.5-Dichloro-2-n-octyl-4-isothiazolin-3-one; Kathon 287T; Kathon 930
CAS No. 
64359-81-5
EINECS No.
264-843-8

Description

DCOIT-20 is a low VOC (Volatile Organic Compound) formulation of the active ingredient is 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one. It provides the same broad
spectrum activity with improved ease of formulation and similarly can be used in both exterior and interior applications. 


Typical Properties
These properties are typical but do not constitute specifications

Appearance greenish-yellow, clear liquid
Active Ingredient 20% dichloroctylisothiazolinone.
Specific Gravity (g/ml) at 25°C Approx. 0.98 g/cm³


Performance Benefits
Long-lasting preservation: when used at recommended mildewcidal levels, offers in-can protection that can eliminate the need for separate in-can protection
Broad spectrum activity: controls a wide range of fungi, algae, and bacteria
Very low water solubility: provides long-term activity by resisting leaching
Non persistent in the environment: readily dissipated by biological and chemical means
Flowable dispersion: easily incorporated into paint formulations
Does not release formaldehyde
Does not require zinc oxide for efficacy
Effective in coatings and building products
Low VOC formulation


Directions for Use
Recommended use levels of DCOIT-20 microbicide range from 0.12% to 0.57%, as supplied, on total weight of paint formulation. When this microbicide is used at recommended mildewcidal levels, a separate in-can preservative may not be needed. Testing this microbicide in customer formulations both for dry film protection and wet stage preservation is highly recommended.
The usage level required to obtain the desired degree of protection with the microbicide depends on several factors. These include the climatic conditions where the paint will be applied, the type of paint produced, the condition of the surface being painted, and the number of coats of paint applied. For maximum protection we recommend using 1150 ppm active ingredient (0.57% product as supplied).


Formulating Techniques with DCOIT-20 Microbicide

It is a flowable dispersion that is easily incorporated into paint formulations. In principle, it can be added to the paint at any point in the paint preparation process.

Storage
Dichloroctylisothiazolinone should be stored in tightly sealed original containers and preferably at room temperature. Protect from frost and heat. If the product does freeze, it has to be mixed homogeneously after warming up and can then be used without any loss in effectiveness.

Packing:20Kg per drum, 180Kg per drum or 960Kg per IBC drum.

biocide DCOIT 20

Mode of Transport:

Multiple transportation methods could be selected by customers, including Ocean Transport, Air Transport, Rail Transport and Courier Transport. Our priciple is to delivery the goods reached to customers with shortest time and ecomomic trasnport mode, safe and fast.

CAS NO 64359-81-5

Our service - Right Partner, Better Future.

With more ten years experience in industrial biocide, preservatives and mold inhibitor, We provide comprehensive customer service from the initial consultation to the final delivery of your order. We always serves with enthusiasm and accepts full responsibility in customers' work.Our priority is your satisfaction and growing solid relationships with each of our customers.

You are incharged for signing the contract, all the rest will be done by us. We guarantee belows:

1) Goods quality will be same as samples, or COA which supplied to you firstly.

2) Package also could be done accordingly to cusotmer's request, safe and good look. Conform to standard of dangerous goods shipment. And photoes will be taken during the process of container load, which will be supplied to each customers.

3) Shipment will be done by us, booking the direct, non-transfer vessel for prompt shipment. And shipping details will be advised.

4) After vessel left, the full set shipping docments will be scaned & deliveried to you on time.

5) Any issues after picking up goods or during the usage, pls contact us without hesitation.

As we expand our business all around the world, we look forward to cooperating with you in the near future.

DCOIT biocide