Benzisothiazolinone 10% CAS 2634-33-5

BIT 10 ( 1,2-Benzisothiazolin-3-one)

In-Can Preservation for Paints, Adhesives and Related Products

BIT 10 biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. The Composition is 10% solution of 1,2-Benzisothiazolin-3-one. Benzisothiazolinone 10% is specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks.

Typical Properties
These properties are typical but do not constitute specifications

Product Benefits

1. Broad spectrum activity in high pH systems, controlling bacteria, fungi and yeasts.
2. Stable in the presence of amines.
3. Non specific mode of action, resulting in reduced microbial resistance potential.
4. Ease of handling due to its liquid form and good compatibility in most aqueous compositions.
5. Excellent performance with co-biocides like CMI/MI, bronopol or formaldehyde releasers, which allow performance enhancements and cost reduction.
6. The active ingredient is non-volatile and has a comparatively high heat stability which allows the incorporation in fluids which are still hot.
7. High purity active ingredient, made evident by its clear light colour.

Antimicrobial Properties
Used at recommended dose levels, BIT-10 biocide is effective against the following microorganisms:

______________________________________________________________________

Bacteria                                                               Mould
Pseudomonas aeruginosa                                  Fusarium solani
Pseudomonas fluorescens                                 Aspergilus niger
Pseudomonas putida                                         Alternaria alternata
Escherichia coli                                                  Aureobasidium pullulans
Klebsiella pneumoniae                                      Chaetomium globosum
Enterobacter cloacae

Citrobacter freundii
Proteus vulgaris
Staphylococcus aureus

_______________________________________________________________________

Directions for Use
Below are some general dosing recommendations, however, it is recommended to do
specific testing on the end product to determine optimal dose levels.
Product BIT-10%
(based on total weight of product)

Polymer Emulsions:
Polymer emulsions based on
styrene                                                                                                                 0,05 - 0,15%
acrylic, acrylic, butadiene, PVA and
styrene for various applications.

_________________________________________________________________________

Emulsions paints and coatings                                                                             0,05 - 0,25%

_________________________________________________________________________

Water based adhesives                                                                                        0,05 - 0,25%

_________________________________________________________________________

Printing Inks and fountain solutions                                                                      0,05 - 0,15%

_________________________________________________________________________

Plasters                                                                                                                 0,05 - 0,25%

_________________________________________________________________________

Building materials such as caulks, sealants, 0.08 - 0.25%

grouts, spackling, ready-mix cement and

wallboard compounds, and tape joint compounds

__________________________________________________________________________

Oil recovery materials, such as drill muds,
packer fluids, and completion fluids, containing 0.05 – 0.15%

polysaccharide fluid loss control agents and/or thickeners
such as starch,

___________________________________________________________________________

Secondary oil recovery injection water containing additives,
such as polymer or micellar/polymer waterfloods using thickeners                         0.015 – 0.15%
such as xanthan gum and/or

Package: 25kg, 200 kg per plastic drum; 1mt IBC drum;

Transport Mode:

Multipletransportation methods can be selected, Sea Transport, Air Transport, Express Transport and Railway Transport. The transport method will be done according to customers' request. Our priciple is to delivery the goods reached to customers with shortest time and ecomomic transport mode, safe and fast.

Quality Testing Center:

We have strict requirements on product quality, In order to control the quality of our products, the production department performs product quality inspection on each batch of cargo produced with advanced equipment for testing and manufacturing. Before our new customer places an order, we can send the sample for your testing. We ensure the quality is the same as bulk quality.

Our Market

Our primary markets are North and South American, Southeast Asia, Eastern Europe, Middle East and Africa. With more ten years experience in industrial biocide, preservatives and mold inhibitor, Sinotrust had been supplying customers worldwide with high quality products. For clients who need more than one type of chemical product, we also provide mixed containers which will save you time and money. As we expand our business all around the world, we look forward to cooperating with you in the near future.