Welcome: Sinotrust International Trade Co. Ltd
Language: Chinese ∷  English

Coatings, Paints & Inks

  • CMIT MIT 1.5 antimicrobial agents
  • CMIT MIT 1.5 antimicrobial agents
  • CMIT MIT 1.5 antimicrobial agents
  • CMIT MIT 1.5 antimicrobial agents
  • CMIT MIT 1.5 antimicrobial agents
CMIT MIT 1.5 antimicrobial agentsCMIT MIT 1.5 antimicrobial agentsCMIT MIT 1.5 antimicrobial agentsCMIT MIT 1.5 antimicrobial agentsCMIT MIT 1.5 antimicrobial agents

CMIT MIT 1.5 antimicrobial agents

  • CAS 55965-84-9/96118-96-6
  • Purity:1.5%
  • Appearance:pale yellow to green liquid
  • Package: 25kg, 250 kg, 1250kg per IBC drum;
  • Product description: In-can Preservation for Paints and Other Technical Products. The main active ingredient preparation of chloromethylisothiazolinone/ methylisothiazolinone to preserve paints, binder dispersions and oth
  • INQUIRY

CMIT MIT 1.5

In-can Preservation for Paints and Other Technical Products


Chemical Name: chloromethylisothiazolinone/methylisothiazolinone

CAS No: 55965-84-9/96118-96-6

CMIT/MIT-1.5 Biocide is an active ingredient preparation of chloromethylisothiazolinone/methylisothiazolinone to preserve paints, binder dispersions and other technical products.

CIT/MIT-1.5 Bactericide is broad-spectrum sterilization, high efficient, Non oxidizing biocide. CIT/MIT preservatives can inhibit Fungus, bacteria and mold. No drug resistance occurs. Low cost than the common Preservative,easy to use,excellent Physical and chemical compatibility, suitable for wide PH Value, even under alkalinity conditions can keep superior stability.kathon cg can degrade to non-toxic substance,no pollution to environment.

Typical Properties

These properties are typical but do not constitute specifications

Appearance

pale yellow to green liquid

Active Ingredient

1.5% chloromethylisothiazolinone/methylisothiazolinone

Odor

weak

pH

2-5

Specific Gravity (g/ml) at 25°C

1.029 ± 0.01

Miscibility/Solubility:Forms clear solutions in all proportions with water, low alcohols, glycols, and glycol ethers .

Compatibility:CMIT/MIT-1.5 is compatible with most common binders. It is generally advisable to check compatibility prior to any application to a special case.

Stability:Temperature: up to 40°C (short periods to 60°C), pH range: 4 to 9

Application and Activity

CMIT/MIT-1.5  is a wet state preservative with a very wide application field such as paints,plasters, adhesives, inks, dispersion and emulsion binders and aqueous technical products in general. It can be used alone or in combination with other active ingredients such as methylisothiazolone (MIT-10) or formaldehyde donors.

CMIT/MIT-1.5  is a proven slimicide in paper manufacturing. CMIT/MIT-1.5 contains neither formaldehyde nor cationic or phenolic substances.Therefore, it is particularly suited for use in products not compatible with these substances.

CMIT/MIT-1.5  has a broad spectrum of activity. It is effective against gram-positive and gram-negative, aerobic and anaerobic bacteria as well as against mould and yeast.

Dosage

The number of technical products being preserved with CMIT/MIT-1.5 is increasing steadily and it is not always possible to predict its suitability. The optimum use should be established by a preliminary experiment. In critical cases, predilution with water is often helpful. The optimum dosage rate of CMIT/MIT-1.5 depends upon the degree of contamination and the susceptibility of the product to be preserved.

Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination of germ counts can assist in choosing the optimum dosage rate.Therefore, the ranges of concentrations listed below should be taken as general guidelines only

Binders 0.05 - 0.3%

Other products 0.05 - 0.15%

Storage, Handling and Disposal

Please refer to the Safety Data Sheet of this product for precise handling instructions.In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing.In case of eye or skin contact despite precautionary measures, wash immediately andthoroughly with plenty of warm water and obtain medical attention.The legal requirements prevailing in your country, especially on working hygiene and in the avoidance of accidents, must be observed.

CMIT/MIT-1.5 Biocide should be stored in closed original containers in a cool place, but not below 0°C. At temperatures below 0°C solidification of the product may occur. If the product does freeze, allow it to return to room temperature and it will turn liquid again. Bioactivity is unaffected by freezing and melting.

Package: 25kg drum, 200kg drum, IBC drum;


Transport Mode:

Multipletransportation methods can be selected, Sea Transport, Air Transport, Express Transport and Railway Transport. The transport method will be done according to customers' request. Our priciple is to delivery the goods reached to customers with shortest time and ecomomic transport mode, safe and fast.


Quality Testing Center:

We have strict requirements on product quality, In order to control the quality of our products, the production department performs product quality inspection on each batch of cargo produced with advanced equipment for testing and manufacturing. Before our new customer places an order, we can send the sample for your testing. We ensure the quality is the same as bulk quality.

Our service
With more ten years experience in industrial biocide, preservatives and mold inhibitor, We provide comprehensive customer service from the initial consultation to the final delivery of your order. We always serves with enthusiasm and accepts full responsibility in customers' work.
We have own specialized quality control center, to improve the goods quality. Our professional R & D team will provide continuous technical service support to our customer. With the long-term cooperation with customers from all over the world, we have opened up new business scopes. We always adhere to customer-centricity, focus on product quality, respond quickly to customer needs, and provide customers with stable and reliable products.